Editing Gatekeeper

Jump to: navigation, search

Warning: You are not logged in. Your IP address will be publicly visible if you make any edits. If you log in or create an account, your edits will be attributed to your username, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.
Latest revision Your text
Line 185: Line 185:
 
** we are using the brown pair for this
 
** we are using the brown pair for this
 
** the +5V comes from the PSU, but the beagle bord does the switching through pin 9 on 1.8v
 
** the +5V comes from the PSU, but the beagle bord does the switching through pin 9 on 1.8v
 
TQ reverse engineered the pinout and gathered the following details:
 
 
* Pin 4 is 12V
 
* Pin 5 is Gnd
 
* Pin 7 is floating, but pulled to ground by the relay steering
 
* Pin 8 is 5V
 
 
Thus, solid is a fixed voltage; stripe is ground (possibly floating)
 
  
 
== Local junction box ==
 
== Local junction box ==

Please note that all contributions to HSG Wiki are considered to be released under the Creative Commons Attribution (see Hsg:Copyrights for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. Do not submit copyrighted work without permission!

Cancel | Editing help (opens in new window)

Templates used on this page: