Difference between revisions of "Lathe"

From HSG Wiki
Jump to: navigation, search
(start)
 
(add note about drive belt size)
 
Line 3: Line 3:
 
The spindle has an M20x1 thread with an M8 thread in the center, with a center in the center and a spur drive on the outside.<br />
 
The spindle has an M20x1 thread with an M8 thread in the center, with a center in the center and a spur drive on the outside.<br />
 
The tailstock has a (probably) MT2 live center.<br />
 
The tailstock has a (probably) MT2 live center.<br />
 +
 +
the drive V belt appears to be 8*9*785mm<br />

Latest revision as of 02:11, 5 July 2021

A Huvema HU-1000-2.
Currently lacking a chuck or faceplate.
The spindle has an M20x1 thread with an M8 thread in the center, with a center in the center and a spur drive on the outside.
The tailstock has a (probably) MT2 live center.

the drive V belt appears to be 8*9*785mm