Difference between revisions of "Space control (manual)"

From HSG Wiki
Jump to: navigation, search
(Skylight control)
 
(One intermediate revision by one other user not shown)
Line 2: Line 2:
  
 
== Open Interface ==
 
== Open Interface ==
1. Open browser and go to http://unipi.0x20/openhab.app
+
1. Connect to space wifi.
 +
2. Open browser and go to http://unipi.0x20 (don't forget the "http://" part or your browser will think it is a search engine query).
  
 
== Skylight control ==
 
== Skylight control ==
- To open skylight:
+
# To open skylight:
 
1. Press "Up"-button under "Roof status" section.
 
1. Press "Up"-button under "Roof status" section.
  
- To close skylight:
+
# To close skylight:
 
1. Press "Down"-button under "Roof status" section.
 
1. Press "Down"-button under "Roof status" section.
  
Line 21: Line 22:
 
== Lights & Door control ==
 
== Lights & Door control ==
 
Labeled buttons in interface are self-explanatory.
 
Labeled buttons in interface are self-explanatory.
 +
 +
[[Category:Hackerspace]]

Latest revision as of 17:46, 9 September 2018

This functionality is controlled by our home automation assistant SpaceControl/Unipi based on OpenHAB.

Open Interface[edit]

1. Connect to space wifi. 2. Open browser and go to http://unipi.0x20 (don't forget the "http://" part or your browser will think it is a search engine query).

Skylight control[edit]

  1. To open skylight:

1. Press "Up"-button under "Roof status" section.

  1. To close skylight:

1. Press "Down"-button under "Roof status" section.

Fan control[edit]

To start fan: 1. #Open roof. Fan starts automatically but takes about 15 minutes to start spinning. 2. If roof is open and fan is not on: Press "Up"-button under "Roof status". The fan takes about 15 minutes to start spinning.

To stop fan: 1. Press the "Stop"-button under "Roof status".

Lights & Door control[edit]

Labeled buttons in interface are self-explanatory.