Difference between revisions of "Space control (manual)"
From HSG Wiki
(Created page with "This functionality is controlled by our home automation assistant SpaceControl/Unipi. == Open Interface == 1. Open browser and go to http://unipi.0x20/openhab.app") |
|||
| Line 1: | Line 1: | ||
| − | This functionality is controlled by our home automation assistant SpaceControl/Unipi. | + | This functionality is controlled by our home automation assistant SpaceControl/Unipi based on OpenHAB. |
== Open Interface == | == Open Interface == | ||
1. Open browser and go to http://unipi.0x20/openhab.app | 1. Open browser and go to http://unipi.0x20/openhab.app | ||
| + | |||
| + | == Open roof == | ||
| + | 1. Press "Up"-button under "Roof status" section. | ||
| + | |||
| + | == Fan control == | ||
| + | To start fan: | ||
| + | 1. [[#Open roof]]. Fan starts automatically but takes about 15 minutes to start spinning. | ||
| + | 2. If roof is open and fan is not on: Press "Up"-button under "Roof status". The fan takes about 15 minutes to start spinning. | ||
| + | |||
| + | To stop fan: | ||
| + | 1. Press the "Stop"-button under "Roof status". | ||
| + | |||
| + | == Lights & Door control == | ||
| + | Labeled buttons in interface are self-explanatory. | ||
Revision as of 16:21, 24 July 2018
This functionality is controlled by our home automation assistant SpaceControl/Unipi based on OpenHAB.
Open Interface
1. Open browser and go to http://unipi.0x20/openhab.app
Open roof
1. Press "Up"-button under "Roof status" section.
Fan control
To start fan: 1. #Open roof. Fan starts automatically but takes about 15 minutes to start spinning. 2. If roof is open and fan is not on: Press "Up"-button under "Roof status". The fan takes about 15 minutes to start spinning.
To stop fan: 1. Press the "Stop"-button under "Roof status".
Lights & Door control
Labeled buttons in interface are self-explanatory.
