Difference between revisions of "Space control (manual)"
From HSG Wiki
(→Skylight control) |
|||
| Line 2: | Line 2: | ||
== Open Interface == | == Open Interface == | ||
| − | 1. Open browser and go to http://unipi.0x20/ | + | 1. Connect to space wifi. |
| + | 2. Open browser and go to http://unipi.0x20 (don't forget the "http://" part or your browser will think it is a search engine query). | ||
== Skylight control == | == Skylight control == | ||
| − | + | # To open skylight: | |
1. Press "Up"-button under "Roof status" section. | 1. Press "Up"-button under "Roof status" section. | ||
| − | + | # To close skylight: | |
1. Press "Down"-button under "Roof status" section. | 1. Press "Down"-button under "Roof status" section. | ||
Revision as of 16:25, 24 July 2018
This functionality is controlled by our home automation assistant SpaceControl/Unipi based on OpenHAB.
Open Interface
1. Connect to space wifi. 2. Open browser and go to http://unipi.0x20 (don't forget the "http://" part or your browser will think it is a search engine query).
Skylight control
- To open skylight:
1. Press "Up"-button under "Roof status" section.
- To close skylight:
1. Press "Down"-button under "Roof status" section.
Fan control
To start fan: 1. #Open roof. Fan starts automatically but takes about 15 minutes to start spinning. 2. If roof is open and fan is not on: Press "Up"-button under "Roof status". The fan takes about 15 minutes to start spinning.
To stop fan: 1. Press the "Stop"-button under "Roof status".
Lights & Door control
Labeled buttons in interface are self-explanatory.
