Space control (manual)

From HSG Wiki
Revision as of 16:23, 24 July 2018 by Enzian (talk | contribs)
Jump to: navigation, search

This functionality is controlled by our home automation assistant SpaceControl/Unipi based on OpenHAB.

Open Interface

1. Open browser and go to http://unipi.0x20/openhab.app

Skylight control

To open skylight: 1. Press "Up"-button under "Roof status" section.

To close skylight: 1. Press "Down"-button under "Roof status" section.

Fan control

To start fan: 1. #Open roof. Fan starts automatically but takes about 15 minutes to start spinning. 2. If roof is open and fan is not on: Press "Up"-button under "Roof status". The fan takes about 15 minutes to start spinning.

To stop fan: 1. Press the "Stop"-button under "Roof status".

Lights & Door control

Labeled buttons in interface are self-explanatory.