Difference between revisions of "Cisco Air-CAP-2702O-E-K9"
From HSG Wiki
Carroarmato0 (talk | contribs) |
Carroarmato0 (talk | contribs) |
||
| Line 28: | Line 28: | ||
* Keep the MODE button pressed while providing the device with power until the LED blinks RED. | * Keep the MODE button pressed while providing the device with power until the LED blinks RED. | ||
| + | |||
| + | == Reset Factory Default == | ||
| + | * Enter [[#Entering_ROMMON_Mode|ROMMON mode]] | ||
Revision as of 13:57, 15 May 2021
Specifications
Vendor: Cisco
Model: Aironet 2700 Series 802.11ac Dual Band Access Point
Part Number: AIR-CAP2702I-E-K9 v03
System Memory:
- 512 MB DRAM
- 64 MB flash
Power Draw: 15W
Interfaces:
- 2x10/100/1000BASE-T autosensing (RJ-45)
- Management console port (RJ-45)
CPU: PowerPC CPU at 800Mhz, revision number 0x2151 with 376814K/134656K bytes of memory
Console: 9600 8N1, Hardware Flow Control = no, Software Flow Control = no
Entering ROMMON Mode
ROMmon (ROM Monitor) is a bootstrap program that initializes the hardware and boots the Cisco IOS XE software when you power on or reload a router or other device. If your device does not find a valid system image to load when it is booting, the system enters the ROMMON mode.
- Keep the MODE button pressed while providing the device with power until the LED blinks RED.
Reset Factory Default
- Enter ROMMON mode
