Difference between revisions of "Control Space"
From HSG Wiki
(Created page with "Category:Projects ===== Building the firmware ===== Start from https://github.com/arendst/Sonoff-Tasmota. Apply the following patch, fixing the contents of STA_PASS1....") |
(→Configuration) |
||
Line 109: | Line 109: | ||
cmnd/DVES_189EE1/SwitchTopic DVES_1141BC | cmnd/DVES_189EE1/SwitchTopic DVES_1141BC | ||
# Control target device from buttons | # Control target device from buttons | ||
− | cmnd/DVES_189EE1/ButtonTopic | + | cmnd/DVES_189EE1/ButtonTopic DVS_1141BC |
# Set relay status (also try ON and OFF) | # Set relay status (also try ON and OFF) | ||
cmnd/DVES_189EE1/POWER1 TOGGLE | cmnd/DVES_189EE1/POWER1 TOGGLE | ||
</pre></code> | </pre></code> |
Revision as of 01:09, 1 June 2018
Building the firmware
Start from https://github.com/arendst/Sonoff-Tasmota. Apply the following patch, fixing the contents of STA_PASS1.
diff --git a/platformio.ini b/platformio.ini
index cb5da39..2fde240 100644
--- a/platformio.ini
+++ b/platformio.ini
@@ -65,7 +65,7 @@ monitor_speed = 115200
;upload_speed = 115200
upload_speed = 512000
upload_resetmethod = nodemcu
-upload_port = COM5
+upload_port = /dev/ttyUSB0
; *** Fix Esp/Arduino core 2.4.x induced Tasmota unused floating point includes
extra_scripts = pio/strip-floats.py
@@ -331,3 +331,20 @@ monitor_speed = ${common.monitor_speed}
upload_speed = ${common.upload_speed}
upload_port = ${common.upload_port}
extra_scripts = ${common.extra_scripts}
+
+[env:wemos-d1-mini]
+platform = espressif8266
+framework = arduino
+board = esp01_1m
+board_flash_mode = dout
+build_flags = -Wl,-Tesp8266.flash.1m0.ld -DMQTT_MAX_PACKET_SIZE=1000
+lib_deps = PubSubClient, NeoPixelBus, IRremoteESP8266, ArduinoJSON
+extra_scripts = pio/strip-floats.py
+
+; *** Serial Monitor options
+monitor_baud = 115200
+
+; *** Upload Serial reset method for Wemos and NodeMCU
+upload_resetmethod = nodemcu
+upload_speed = 115200
+;upload_port = COM6
diff --git a/sonoff/user_config.h b/sonoff/user_config.h
index 8cc07d3..a09444b 100644
--- a/sonoff/user_config.h
+++ b/sonoff/user_config.h
@@ -59,8 +59,8 @@
#define WIFI_SUBNETMASK "255.255.255.0" // [IpAddress3] If not using DHCP set Network mask
#define WIFI_DNS "192.168.2.27" // [IpAddress4] If not using DHCP set DNS IP address (might be equal to WIFI_GATEWAY)
-#define STA_SSID1 "" // [Ssid1] Wifi SSID
-#define STA_PASS1 "" // [Password1] Wifi password
+#define STA_SSID1 "0x20" // [Ssid1] Wifi SSID
+#define STA_PASS1 "[redacted]" // [Password1] Wifi password
#define STA_SSID2 "" // [Ssid2] Optional alternate AP Wifi SSID
#define STA_PASS2 "" // [Password2] Optional alternate AP Wifi password
#define WIFI_CONFIG_TOOL WIFI_WPSCONFIG // [WifiConfig] Default tool if wifi fails to connect
@@ -79,7 +79,7 @@
// -- MQTT ----------------------------------------
#define MQTT_USE 1 // [SetOption3] Select default MQTT use (0 = Off, 1 = On)
-#define MQTT_HOST "" // [MqttHost]
+#define MQTT_HOST "buzz.0x20" // [MqttHost]
#define MQTT_FINGERPRINT1 "A5 02 FF 13 99 9F 8B 39 8E F1 83 4F 11 23 65 0B 32 36 FC 07" // [MqttFingerprint1]
#define MQTT_FINGERPRINT2 "A5 02 FF 13 99 9F 8B 39 8E F1 83 4F 11 23 65 0B 32 36 FC 07" // [MqttFingerprint2]
#define MQTT_PORT 1883 // [MqttPort] MQTT port (10123 on CloudMQTT)
@@ -121,7 +121,7 @@
// -- HTTP ----------------------------------------
#define WEB_SERVER 2 // [WebServer] Web server (0 = Off, 1 = Start as User, 2 = Start as Admin)
#define WEB_PASSWORD "" // [WebPassword] Web server Admin mode Password for WEB_USERNAME (empty string = Disable)
-#define FRIENDLY_NAME "Sonoff" // [FriendlyName] Friendlyname up to 32 characters used by webpages and Alexa
+#define FRIENDLY_NAME "Sonoff SV" // [FriendlyName] Friendlyname up to 32 characters used by webpages and Alexa
#define EMULATION EMUL_NONE // [Emulation] Select Belkin WeMo (single relay/light) or Hue Bridge emulation (multi relay/light) (EMUL_NONE, EMUL_WEMO or EMUL_HUE)
// -- Time - Up to three NTP servers in your region
@@ -232,7 +232,7 @@
// -- HTTP ----------------------------------------
#define USE_WEBSERVER // Enable web server and wifi manager (+66k code, +8k mem)
#define WEB_PORT 80 // Web server Port for User and Admin mode
- #define WEB_USERNAME "admin" // Web server Admin mode user name
+ #define WEB_USERNAME "0x20" // Web server Admin mode user name
#define USE_EMULATION // Enable Belkin WeMo and Hue Bridge emulation for Alexa (+16k code, +2k mem)
// -- mDNS ----------------------------------------
Follow the instructions on the above project's wiki to build and install the firmware.
Configuration
Watch the MQTT channels tele/sonoff/INFO1
and tele/sonoff/INFO2
on buzz (username pi/password [redacted]).
(e.g., mosquitto_sub -h buzz.0x20 -v -t "tele/sonoff/#"
) while the device is first booted.
You will see:
tele/sonoff/INFO1 {"Module":"Sonoff Basic","Version":"5.14.0b","FallbackTopic":"DVES_8E52C7","GroupTopic":"sonoffs"}
tele/sonoff/INFO2 {"WebServerMode":"Admin","Hostname":"sonoff-4807","IPAddress":"10.20.1.127"}
There may be other lines between these.
Note the suffix after DVES in the first line and after sonoff- in the second. Make a label containing those suffixes separated by a slash, e.g., for the above lines, the label would be 8E52C7/4807
.
I found the following messages useful:
# Set switches to send both transitions. 2 is the same but inverted
cmnd/DVES_189EE1/SwitchMode 1
# Set target device to control from switches. No message controls itself
cmnd/DVES_189EE1/SwitchTopic DVES_1141BC
# Control target device from buttons
cmnd/DVES_189EE1/ButtonTopic DVS_1141BC
# Set relay status (also try ON and OFF)
cmnd/DVES_189EE1/POWER1 TOGGLE