Difference between revisions of "Space control (manual)"
From HSG Wiki
| Line 4: | Line 4: | ||
1. Open browser and go to http://unipi.0x20/openhab.app | 1. Open browser and go to http://unipi.0x20/openhab.app | ||
| − | == | + | == Skylight control == |
| + | To open skylight: | ||
1. Press "Up"-button under "Roof status" section. | 1. Press "Up"-button under "Roof status" section. | ||
| + | |||
| + | To close skylight: | ||
| + | 1. Press "Down"-button under "Roof status" section. | ||
== Fan control == | == Fan control == | ||
Revision as of 16:23, 24 July 2018
This functionality is controlled by our home automation assistant SpaceControl/Unipi based on OpenHAB.
Open Interface
1. Open browser and go to http://unipi.0x20/openhab.app
Skylight control
To open skylight: 1. Press "Up"-button under "Roof status" section.
To close skylight: 1. Press "Down"-button under "Roof status" section.
Fan control
To start fan: 1. #Open roof. Fan starts automatically but takes about 15 minutes to start spinning. 2. If roof is open and fan is not on: Press "Up"-button under "Roof status". The fan takes about 15 minutes to start spinning.
To stop fan: 1. Press the "Stop"-button under "Roof status".
Lights & Door control
Labeled buttons in interface are self-explanatory.
