Difference between revisions of "Lathe"
From HSG Wiki
(start) |
(add note about drive belt size) |
||
| Line 3: | Line 3: | ||
The spindle has an M20x1 thread with an M8 thread in the center, with a center in the center and a spur drive on the outside.<br /> | The spindle has an M20x1 thread with an M8 thread in the center, with a center in the center and a spur drive on the outside.<br /> | ||
The tailstock has a (probably) MT2 live center.<br /> | The tailstock has a (probably) MT2 live center.<br /> | ||
| + | |||
| + | the drive V belt appears to be 8*9*785mm<br /> | ||
Latest revision as of 02:11, 5 July 2021
A Huvema HU-1000-2.
Currently lacking a chuck or faceplate.
The spindle has an M20x1 thread with an M8 thread in the center, with a center in the center and a spur drive on the outside.
The tailstock has a (probably) MT2 live center.
the drive V belt appears to be 8*9*785mm
