Space control (manual)
From HSG Wiki
This functionality is controlled by our home automation assistant SpaceControl/Unipi based on OpenHAB.
Open Interface
1. Connect to space wifi. 2. Open browser and go to http://unipi.0x20 (don't forget the "http://" part or your browser will think it is a search engine query).
Skylight control
- To open skylight:
1. Press "Up"-button under "Roof status" section.
- To close skylight:
1. Press "Down"-button under "Roof status" section.
Fan control
To start fan: 1. #Open roof. Fan starts automatically but takes about 15 minutes to start spinning. 2. If roof is open and fan is not on: Press "Up"-button under "Roof status". The fan takes about 15 minutes to start spinning.
To stop fan: 1. Press the "Stop"-button under "Roof status".
Lights & Door control
Labeled buttons in interface are self-explanatory.