Cisco Air-CAP-2702O-E-K9

From HSG Wiki
Revision as of 13:54, 15 May 2021 by Carroarmato0 (talk | contribs)
Jump to: navigation, search
Cisco Air-CAP-2702O-E-K9-Front.jpg
Cisco Air-CAP-2702O-E-K9-Back.jpg

Specifications

Vendor: Cisco

Model: Aironet 2700 Series 802.11ac Dual Band Access Point

Part Number: AIR-CAP2702I-E-K9 v03

System Memory:

  • 512 MB DRAM
  • 64 MB flash

Power Draw: 15W

Interfaces:

  • 2x10/100/1000BASE-T autosensing (RJ-45)
  • Management console port (RJ-45)

CPU: PowerPC CPU at 800Mhz, revision number 0x2151 with 376814K/134656K bytes of memory

Console: 9600 8N1, Hardware Flow Control = no, Software Flow Control = no


Entering ROMMON Mode

ROMmon (ROM Monitor) is a bootstrap program that initializes the hardware and boots the Cisco IOS XE software when you power on or reload a router or other device. If your device does not find a valid system image to load when it is booting, the system enters the ROMMON mode.

  • Keep the MODE button pressed while providing the device with power until the LED blinks RED.
Retrieved from "https://wiki.hackerspace.gent/index.php?title=Cisco_Air-CAP-2702O-E-K9&oldid=7541"