Difference between revisions of "3D Printer"

From HSG Wiki
Jump to: navigation, search
(init with prusa, wanhao, filament and wanted sections)
 
(add Carroarmato0 as a prusa trainer)
 
(17 intermediate revisions by 3 users not shown)
Line 1: Line 1:
The hackerspace currently has 2 [https://en.wikipedia.org/wiki/Fused_filament_fabrication FFM] 3D printers available.
+
The hackerspace currently has 2 [https://en.wikipedia.org/wiki/Fused_filament_fabrication FFF] 3D printers available.
  
 
A [[#Prusa i3 MK3S+ | Prusa i3 MK3S+]] and a [[#Wanhao Duplicator i3 | wanhao Duplicator i3]].
 
A [[#Prusa i3 MK3S+ | Prusa i3 MK3S+]] and a [[#Wanhao Duplicator i3 | wanhao Duplicator i3]].
  
 
There is also a stock of [[#Filament | Filament]] available.
 
There is also a stock of [[#Filament | Filament]] available.
 +
 +
== Usage Checklist ==
 +
<!-- how to address any of these points not being true is out of scope of this checklist -->
 +
<!-- this checklist is only intended to protect the machine from the user, it is not intended to yield a successful print -->
 +
To avoid '''damage''' when using '''either machine''',<br />
 +
have '''high confidence''' that:
 +
* '''before warmup:'''
 +
** your '''G-code''' is sliced for the '''machine and material''' you're using.
 +
** the '''printer''' is '''set''' to the '''sheet''' that will be '''used''' on the machine.
 +
** you're using the right '''sheet''' for the '''material'''. (no PETG on smooth PEI)
 +
** there's '''nothing stuck under''' the removable '''sheet'''. (dirt, filament, '''purge line''', etc)
 +
** there's '''nothing on''' the removable '''sheet'''. (previous purge line, old supports, '''fingerprints''', etc)
 +
** there's nothing blocking the '''machine movement'''. (X and Y run clear, filament comes in from the front of the frame)
 +
** the '''nozzle''' is clean.
 +
** for the '''wanhao:''' the bed is '''leveled'''.
 +
* when '''motion starts:'''
 +
** the nozzle stops '''before it hits the bed'''.
 +
** the nozzle is still clean.
 +
** for the '''prusa:''' the bed is '''leveled'''.
 +
* when '''printing starts:'''
 +
** there is '''enough Z height''' to not scratch the bed. (not too much squish)
 +
** '''no spaghetti''' / blob forms around the nozzle.
 +
** the extruder gear '''doesn't skip''' / grind on fast sections. (e.g.: '''second layer infill''')
 +
* when the '''print is complete:'''
 +
** the '''contact area''' between the bed and the print is '''completely cooled''' before removing the print.
 +
** you '''reported any issues''' that occurred.
 +
** you '''paid for the material''' you used.
  
 
== Prusa i3 MK3S+ ==
 
== Prusa i3 MK3S+ ==
Line 11: Line 38:
 
=== Usage ===
 
=== Usage ===
 
This device is well documented on [https://help.prusa3d.com/en/tag/mk3s-2 their website] and elsewhere on the internet.<br />
 
This device is well documented on [https://help.prusa3d.com/en/tag/mk3s-2 their website] and elsewhere on the internet.<br />
Despite this, use of it is limited to those who have received training on this specific device, by someone who has received training on this specific device.<br />
+
Despite this, use of it is limited to those who have received '''training on this specific device''', by someone who has received training on this specific device.<br />
 
This is in hopes of informing new users of specific quirks.<br />
 
This is in hopes of informing new users of specific quirks.<br />
 +
 +
==== Training ====
 +
People who are able to provide training on using this device include:
 +
* [[User:Evils | Evils]]
 +
* [[User:Thequux | TQ]]
 +
* [[User:Carroarmato0 | Carroarmato0]]
  
 
==== Sheets ====
 
==== Sheets ====
 
We have a smooth and a satin print bed sheet available.<br />
 
We have a smooth and a satin print bed sheet available.<br />
 +
'''Before starting a print, make sure the printer is configured for the sheet that is on it!'''<br />
 
* Printing anything but PLA on the smooth sheet without additional precautions is not allowed.
 
* Printing anything but PLA on the smooth sheet without additional precautions is not allowed.
 
** See [https://help.prusa3d.com/en/materials Prusa's table of material compatibility for details].
 
** See [https://help.prusa3d.com/en/materials Prusa's table of material compatibility for details].
 
* Each sheet needs a different height offset [https://help.prusa3d.com/en/article/first-layer-calibration-i3_112364 calibration] which can be switched using [https://help.prusa3d.com/en/article/steel-sheet-profiles_1955 profiles].
 
* Each sheet needs a different height offset [https://help.prusa3d.com/en/article/first-layer-calibration-i3_112364 calibration] which can be switched using [https://help.prusa3d.com/en/article/steel-sheet-profiles_1955 profiles].
 
** Because the inductive sensor does not sense the coating thickness.
 
** Because the inductive sensor does not sense the coating thickness.
See [https://help.prusa3d.com/en/article/flexible-steel-sheets-guidepost_2195 Prusa's guide on print sheets for an overview and more details]
+
See [https://help.prusa3d.com/en/article/flexible-steel-sheets-guidepost_2195 Prusa's guide on print sheets for an overview and more details].
  
 +
=== Notes ===
  
The minimum size for a stone base seems to be 28*35cm.<br />
+
* The front right heated bed retention screw's head was stripped during installation.
 +
** There should be a spare in the spares bag, swap that in if it is ever undone.
 +
* The minimum size for a stone base seems to be 28*35cm.
  
 
== Filament ==
 
== Filament ==
Line 53: Line 90:
 
This device accepts the same 1.75mm filament as the Prusa.<br />
 
This device accepts the same 1.75mm filament as the Prusa.<br />
  
Build volume: TBD<br />
+
Build volume: 200*200*170mm (X*Y*Z)<br />
 +
(Z is limited by the filament's ability to get into the extruder, and some cabling)<br />
  
 
The minimum size for a stone base seems to be 41*39cm.<br />
 
The minimum size for a stone base seems to be 41*39cm.<br />
 +
 +
==== Training ====
 +
People who are able to provide training on using this device include:
 +
* [[User:Sasja | Sasja]]
 +
* [[User:Evils | Evils]]
 +
* [[User:Thequux | TQ]]
 +
* [[User:Carroarmato0 | Carroarmato0]]
  
 
==== OctoPi ====
 
==== OctoPi ====
Line 68: Line 113:
 
== Wanted ==
 
== Wanted ==
 
* Reasonably priced automatic fire suppression that won't be triggered by a smoke machine.
 
* Reasonably priced automatic fire suppression that won't be triggered by a smoke machine.
* Individual dry boxes for each in-use spool. (with a pass-through and some mechanism to allow the spool to rotate)
+
* Indicating desiccant in dust proof packaging for the dry boxes.
** To reduce moisture uptake when not used and to reduce the machine height by not needing the spool holder above it.
 
*** What if any changes need to be made to the machine to accept filament from a spool next to it?
 
** indicating desiccant in dust proof packaging that fits next to the spool.
 
 
* Draft resistant enclosure(s).
 
* Draft resistant enclosure(s).
* Stone bases for the printers.
+
* Raspberry Pi Zero 2 W (for octoprint and integration in the controller enclosure).
** Preferably thick granite or other large, dense and rigid material with a large enough flat side.
 

Latest revision as of 17:57, 10 March 2022

The hackerspace currently has 2 FFF 3D printers available.

A Prusa i3 MK3S+ and a wanhao Duplicator i3.

There is also a stock of Filament available.

Usage Checklist[edit]

To avoid damage when using either machine,
have high confidence that:

  • before warmup:
    • your G-code is sliced for the machine and material you're using.
    • the printer is set to the sheet that will be used on the machine.
    • you're using the right sheet for the material. (no PETG on smooth PEI)
    • there's nothing stuck under the removable sheet. (dirt, filament, purge line, etc)
    • there's nothing on the removable sheet. (previous purge line, old supports, fingerprints, etc)
    • there's nothing blocking the machine movement. (X and Y run clear, filament comes in from the front of the frame)
    • the nozzle is clean.
    • for the wanhao: the bed is leveled.
  • when motion starts:
    • the nozzle stops before it hits the bed.
    • the nozzle is still clean.
    • for the prusa: the bed is leveled.
  • when printing starts:
    • there is enough Z height to not scratch the bed. (not too much squish)
    • no spaghetti / blob forms around the nozzle.
    • the extruder gear doesn't skip / grind on fast sections. (e.g.: second layer infill)
  • when the print is complete:
    • the contact area between the bed and the print is completely cooled before removing the print.
    • you reported any issues that occurred.
    • you paid for the material you used.

Prusa i3 MK3S+[edit]

Bought as a kit with member donations with the intent of having high quality, reliable and easy to use 3D printing available in the space.
Primary contact: Evils

Usage[edit]

This device is well documented on their website and elsewhere on the internet.
Despite this, use of it is limited to those who have received training on this specific device, by someone who has received training on this specific device.
This is in hopes of informing new users of specific quirks.

Training[edit]

People who are able to provide training on using this device include:

Sheets[edit]

We have a smooth and a satin print bed sheet available.
Before starting a print, make sure the printer is configured for the sheet that is on it!

See Prusa's guide on print sheets for an overview and more details.

Notes[edit]

  • The front right heated bed retention screw's head was stripped during installation.
    • There should be a spare in the spares bag, swap that in if it is ever undone.
  • The minimum size for a stone base seems to be 28*35cm.

Filament[edit]

There are usually several spools of filament in the hackerspace.

Usage[edit]

  • Any spool marked with an owner and a price can be used by anyone that pays for the used filament.
  • Any spool not marked with an owner can be assumed to be property of the printer/hackerspace.
    • Any such spool not marked with a price can be used at typical market price for the material.
      • Please mark such spools with the price when you determine one.
    • Pay for usage into the 3D-printer bar account, which can be used to pay for new filament and repairs.
  • Unless marked otherwise, prices are assumed to be per 1000g and must have their unit marked (E.G.: €30).
  • If sealed packaging is marked, make sure to transfer such markings to the spool itself on opening the packaging.
  • Always return remaining filament to a sealed container to prevent moisture uptake.
  • Inform the owner when you use a substantial amount of their spool's filament, or when the filament runs out.
  • The empty spool remains property of the owner unless otherwise marked.
  • Being allowed to use the filament does not include being allowed to use the printer.

Wanhao Duplicator i3[edit]

Owned by Sasja and put in the space to make use available to others.

Usage[edit]

This device is free to use after receiving training on this specific device from someone who has received training on this specific device.

Always level the bed before a printing session!

This device is fitted with an after-market print sheet similar to Prusa's smooth sheet described in Sheets.
However, due to this sheet being held on by a magnetic sticker instead of magnets in the heated bed,
the maximum allowed temperature is 75°C.
This device accepts the same 1.75mm filament as the Prusa.

Build volume: 200*200*170mm (X*Y*Z)
(Z is limited by the filament's ability to get into the extruder, and some cabling)

The minimum size for a stone base seems to be 41*39cm.

Training[edit]

People who are able to provide training on using this device include:

OctoPi[edit]

This device is connected to a raspberry pi 4 running OctoPi (a pre-made Raspbian running OctoPrint).
That pi is equipped with a USB controlled relay to switch off power when the printer is not in use.
That relay prevents usage of the machine from its control panel, use http://octopi/

Unattended Operation[edit]

This model of printer is known for spontaneously catching fire,
unattended operation is absolutely not permitted!

Wanted[edit]

  • Reasonably priced automatic fire suppression that won't be triggered by a smoke machine.
  • Indicating desiccant in dust proof packaging for the dry boxes.
  • Draft resistant enclosure(s).
  • Raspberry Pi Zero 2 W (for octoprint and integration in the controller enclosure).