Space control (manual)

From HSG Wiki
Revision as of 17:46, 9 September 2018 by 62.205.122.85 (talk)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This functionality is controlled by our home automation assistant SpaceControl/Unipi based on OpenHAB.

Open Interface

1. Connect to space wifi. 2. Open browser and go to http://unipi.0x20 (don't forget the "http://" part or your browser will think it is a search engine query).

Skylight control

  1. To open skylight:

1. Press "Up"-button under "Roof status" section.

  1. To close skylight:

1. Press "Down"-button under "Roof status" section.

Fan control

To start fan: 1. #Open roof. Fan starts automatically but takes about 15 minutes to start spinning. 2. If roof is open and fan is not on: Press "Up"-button under "Roof status". The fan takes about 15 minutes to start spinning.

To stop fan: 1. Press the "Stop"-button under "Roof status".

Lights & Door control

Labeled buttons in interface are self-explanatory.