How to play audio

pseudocode

1. don't touch the amplifier
2. connect analog audio to the black box under the bar countertop (near the phone, left of the spacebar display)
   1. make sure the source is outputting
   2. make sure to use an input
      • the first 5 RCA stereo pairs are inputs (left to right, as seen from the back)
        • rotary switch (chickenhead) all the way to the right (as seen from the front) is off
          inputs 1-5 from there to the left (clockwise)
        • red is always the right signal
3. with the volume knob set to an appropriate level, try all rotary switch positions
   1. if nothing comes out of the speakers, toggle the middle switch and try again
      1. if still nothing, retry from step 1, once
4. fuck it, see if the amplifier is on
   1. see if the cable to the amplifier got disconnected, reconnect it if it is
      • touching the cable will introduce a convenient noise signal which can confirm the wire is connected to the amplifier
        • this should be safe
5. ask for help
6. report the problem
   1. give up
7. make original music

english

see above and parse

dutch

vertaal het bovenstaande